1 Gang
Hager Allure WBHP1S | Single Internal PowerPoint With Shutter | 10Amp | Gloss White
$7.87
$7.15 ex. GST
Search Results:
Search Results:
Search Results:
Search Results:
Find the best Hager allure power points here at Sparky Direct. [ Read More ]
Finish is usually the first decision on an Allure job. The plate is what the client sees, so the choice has to suit the cabinetry, tapware, and door hardware in the same room. Picking a finish family early avoids stock gaps and mixed batches later.
A slimmer plate sits closer to the wall and casts a smaller shadow line. The effect is cleanest in kitchens, bedrooms, living rooms, home offices, and hospitality spaces, where bulky outlets can look dated against modern joinery and lighting.
The cosmetic gain still has to be matched to the practical fit. Wall box depth and mechanism choice should be confirmed before ordering, particularly for USB-integrated outlets that need more space behind the plate.
Three finish families cover most Allure specifications. White suits broad interiors and pairs with most cabinetry and wall paint. Black creates contrast against light walls and works in feature spaces and darker schemes. Brushed metal sits in the premium tier and reads well next to matching tapware and door hardware.
Finish should be consistent across power points, switches, dimmers, USB outlets, and data plates in the same visual zone. Product codes need a careful check before ordering, as gloss white and matt white (for example) read very differently on a finished wall.
A stylish power outlet still has to meet the same electrical performance and compliance requirements as any other GPO. The difference is in the visible details: finish durability, plate design, the tactile feel of the switch, and a coordinated range of matching accessories.
Aesthetics should never override electrical suitability. An indoor designer GPO is not the same as an outdoor weatherproof outlet. Always confirm environmental rating and installation location with the licensed electrician before ordering.
Allure is broken down by outlet count, USB integration, and the matching accessories that go around the outlets on the same wall. Most jobs need a mix of all three categories to cover the visible wall hardware properly.
The double GPO is the default for general living areas, kitchens, bedrooms, and work areas. Two outlets in one wall position cover most plug-in loads without forcing the user to swap appliances at the wall.
A single power point still has a place. Dedicated appliance circuits, behind-fridge outlets, microwave points, and other fixed-appliance locations are often cleaner with a single outlet.
USB power points integrate charging ports directly into the wall plate. The user plugs a USB cable straight into the outlet, which removes the need for a plug-in adapter and frees up the standard sockets for everything else.
Common locations: bedside walls, kitchen benches, home offices, hotel rooms, shared workspaces, and study areas. The buyer decision against a standard outlet usually comes down to how often the household charges phones, tablets, and accessories at that wall position. If a charger lives there permanently, a USB outlet is a tidier result.
Specifying matching Allure light switches from the same range is what makes the design coordinated rather than just modern. The switch plates, dimmer plates, and data outlets all carry the same finish family.
Dimmer mechanisms need a load check before specification. Not all dimmers handle all LED drivers, and not all dimmer switches are rated for the same wattage range. Confirm load compatibility with the electrician before ordering the matching dimmer plate.
Most general-purpose outlets are 10A, which covers the great majority of plug-in domestic and commercial appliances. High-draw appliances such as portable air conditioners, larger workshop tools, and some commercial equipment need 15A outlets on a circuit rated to match.
Current rating has to line up across the outlet, the cable, the protective device, and the connected load. A licensed electrician should confirm the right rating before installation, particularly when an existing 10A point is being upgraded to handle a new appliance.
Designer plates only matter if the device behind them is safe, compliant, and built to last. Compliance is non-negotiable on any Australian wiring device, and durability decides whether a premium plate still looks premium five years in.
Australian socket outlets must comply with AS/NZS 3112 for plugs and socket-outlets, and AS/NZS 3000 governs the installation work behind them. The Regulatory Compliance Mark (RCM) on the product is the buyer-side check that the device has been certified for sale and use in Australia.
Buying through a reputable Australian electrical supplier protects the compliance chain. It also keeps warranty support, batch consistency, and product documentation accessible if something has to be replaced under warranty.
The factors that decide long-term durability are the material spec, the contact construction, and how the plate finish holds up over years of use. UV-stabilised materials, robust contacts, and finish coatings that resist scuffing and discolouration all matter on a high-use outlet.
The premium spec earns its place in rental properties, kitchens, commercial fit-outs, and offices, where the outlet is touched daily for years. Cheaper alternatives can look identical on day one and then yellow, mark, or loosen after a few years of use.
Standard indoor designer GPOs, including the Allure indoor range, are not weatherproof and should not be installed in exposed locations. They are built for protected interior locations on dry walls where moisture, rain, and direct sunlight will not reach the outlet.
Outdoor walls, wet areas, balconies, garages, and external entertaining zones need an IP-rated Hager weatherproof GPO or another IP-rated weatherproof outlet. Environmental rating, IP rating, and installation location should all be confirmed with the licensed electrician before purchase.
Genuine supply matters for warranty validity, batch consistency, replacement support, and access to compliance documents. Product datasheets and installation instructions should be available before the order is placed, particularly on larger jobs where the spec gets reviewed against the wall box and circuit conditions.
Hager publishes datasheets for the Allure range and warranty terms apply when products are bought through approved supply channels. Sparky Direct stocks Hager Allure as part of the broader Hager catalogue.
The high-level operation is the same as any AS/NZS 3112-compliant socket outlet. The detail below is descriptive, not an installation guide. Any wiring, replacement, or relocation work has to be completed by a licensed electrician.
The outlet provides a fixed connection point from the building circuit to a plug-in appliance. Three conductors run to a standard GPO: active, neutral, and earth. The active and neutral pins carry the supply to the appliance, and the earth pin carries any fault current safely to earth.
Where the outlet has an integrated switch, the switch isolates the active conductor to the socket. Flipping the switch off cuts the supply to the outlet without removing the plug. Switched outlets are common in Australian wiring and are convenient for appliances that stay plugged in.
A USB power point contains internal charging electronics that convert mains AC supply down to low-voltage DC at the USB port. The USB output spec, in volts and amps, affects how fast a connected device charges and which devices are compatible.
The internal electronics take up space behind the plate. USB-integrated outlets usually need a deeper wall box than a basic outlet. Box depth should be confirmed before ordering, particularly on retrofits.
Australian power point circuits should be protected by appropriate circuit breakers and residual current devices (RCDs) per AS/NZS 3000. RCD protection, correct earthing, and verified polarity are part of the standard testing that happens at the end of any installation job.
Testing and commissioning are licensed electrical tasks. The qualified electrician confirms the circuit is protected, earthed, and operating correctly before the installation is signed off.
Selection comes down to four practical questions. Where is the outlet going? What finish does the rest of the room use? What does the box and mechanism behind the plate allow? And how does Allure compare to other ranges on the same job?
Finish has to be locked in before fit-off to avoid stock gaps and mixed batches. On a renovation or new build, the wall device finish should be agreed alongside tapware, cabinetry handles, door hardware, lighting switches, and data points.
White suits the broadest interior palette. Black is the choice for darker schemes and contrast looks. Brushed metal lifts the spec further and reads as premium against matching tapware. Confirm the exact finish code before ordering: gloss, matte, and brushed variants are not interchangeable.
Allure plates, grids, and mechanisms are designed to work together within the same product family. Mixing components across ranges can cause fit or alignment issues.
Box depth is the key check on USB and multi-function outlets. Standard shallow wall boxes can be tight behind a USB-integrated GPO. The electrician should confirm available box depth before the order goes in, especially on retrofit jobs where the existing box is being reused.
Allure sits in the designer tier alongside ranges from Clipsal such as Solis, Saturn Zen, and Iconic, plus the slimline Trader ranges including Trader Puma and Trader Flat Cat. Other modern ranges come from brands such as HPM and Legrand.
The honest comparison is around appearance, finish range, price point, brand preference, stock availability, and project suitability. The sibling Hager Silhouette range sits in a similar designer tier within the Hager catalogue. No range is the "best" for every job: the right pick depends on the visual brief, the budget, and what is already specified for the rest of the wall hardware.
Allure suits any project where the wall device is visible and the rest of the spec is considered. The right application varies with the project type.
Modern GPOs make the biggest visual difference in living rooms, bedrooms, kitchens, and home offices. The wall device is at hand height and in the line of sight, so a cleaner plate and a coordinated finish lift the room without changing the rest of the build.
The decision should match the project tier. A high-spec custom home benefits from a fully coordinated designer wall device range. A more modest budget might justify Allure in feature rooms only, with standard GPOs in less visible areas.
Allure works well on retrofit jobs where the existing wall boxes and circuit conditions allow. The electrician needs to assess box depth, circuit condition, RCD protection, and mechanism compatibility before the plates and mechanisms are ordered.
The strongest retrofit use case is a visual upgrade during a kitchen, bathroom-adjacent, or whole-home refresh. Swapping tired GPOs and switches for an Allure run is a high-impact, relatively low-disturbance change when the existing wiring is in good order.
New builds benefit from early specification. Finish, outlet count, USB locations, and matching switch and dimmer plates should all be decided at the rough-in stage. Locking the spec in once means everything arrives together and the fit-off runs cleanly.
Ordering all matching products together also reduces the risk of mixed batches and finish drift. On larger jobs, that consistency is the difference between a clean designer fit-off and a wall run with three slightly different shades of white.
Boutique offices, retail stores, cafes, accommodation, reception spaces, and boardrooms are all common Allure applications. The brief in these spaces is consistent: finish coordination across the visible wall hardware, durability for daily commercial use, and a replacement supply chain that lasts the life of the fit-out.
Commercial projects often have additional compliance documentation requirements based on the project type and the building classification. The contractor and the project electrician should confirm what is required before specification.
Hager Allure is available through Australian electrical wholesalers and online electrical suppliers. Sparky Direct stocks the range online with transparent trade and retail access.
The full Allure range is available through approved electrical wholesalers. Online supply through Sparky Direct gives trade and retail buyers the same catalogue, the same datasheets, and consistent product codes.
Before ordering, confirm the product code, finish, outlet type (single, double, USB), and quantity. On larger jobs, a take-off across the whole job at once reduces the risk of finish drift between batches.
A cheap designer outlet still has to be compliant and genuine. The lowest price line for a product that fails after 18 months in a kitchen is not value: it is rework. Best value brings together compliance, stock availability, dispatch speed, warranty support, and matching accessory range from one supplier.
Stock availability and dispatch speed are particularly important on jobs running to a tight fit-off date. Sparky Direct holds Hager Allure in Australian stock for fast dispatch.
Bulk ordering across a full job is the cleanest way to keep finish consistent. Mixing batches between supply runs is the most common cause of slight finish mismatches at fit-off, particularly on white plates.
Order matching plates, mechanisms, USB options, switches, and accessories together where possible. Coordinated switch mechanisms and matching accessories from the same range are part of why the Allure system is specified in the first place.
Allure power points have to be installed and maintained correctly to keep the wall device safe and the warranty intact. The principles below are compliance-aware guidance, not an installation procedure.
Fixed power point installation, replacement, relocation, or any wiring work in Australia must be completed by a licensed electrician. The work has to comply with AS/NZS 3000, and final testing covers circuit testing, RCD protection verification, correct earthing, and polarity.
Australian wiring requirements: Fixed electrical installation work is licensed in every Australian state and territory. DIY installation of GPOs and switches is not legal and not safe. A licensed electrician should always carry out the install, the test, and the sign-off.
Planning a wall device run before fit-off avoids most common mistakes. The plan should cover outlet locations, total quantities, USB requirements, wall box depth, finish, and the matching switches and dimmers on the same wall.
Common planning mistakes are easy to avoid with a checklist. Watch for the wrong finish for the rest of the room. Confirm enough box depth for USB-integrated outlets. Check outlet count against the work area layout. Avoid using an indoor outlet where weatherproof protection is required. Confirm product suitability with the electrician before purchase.
Basic user-facing maintenance is straightforward. Wipe plates with a soft, dry or barely damp cloth. Avoid abrasive cleaners and solvents that can damage the plate finish. Visually check outlets for cracks, discolouration, loose plates, or heat marks during normal cleaning.
Any outlet that buzzes, runs hot, shows signs of arcing, or has a loose or damaged plate should be assessed by a licensed electrician straight away. Replacement should match the original range, finish, current rating, and outlet configuration to keep the visual and electrical spec consistent.
Watch Hager Silhouette WBSP1S | Single Power Point 10Amp | Slimline | Gloss White video
Watch Hager Silhouette WBSP2S | Double Power Point 10Amp | Slimline | Gloss White video
Watch Hager Silhouette WBSP2SUSBAC | 10Amp Double Internal Powerpoint With USB A+C Charger | Gloss White video
Very happy with these Hager Silhouette power points. It was a tough call between these and the Finesse range but we opted for the Silhouette and couldn't be happier. The switch has a nice solid click, the matte finish feels luxury yet simple. Can't wait to have our sparky install these in our kitchen on the stone splashback!
Simple and functional with clean lines make these slimline power points perfect to go in our splashback in the kitchen. We didn't want anything too chunky that protruded too much and these are ideal for the task. Sparky Direct were fantastic to deal with, very friendly and prompt delivery.
Sparky Direct were incredible to deal with, they answered all my questions almost instantly via their live chat support. The shipping was quick and everything arrived well packaged and in working order. Will be buying from these guys in the future!
Quality products in stock • Fast Australia-wide delivery • Competitive trade pricing
Browse Hager Allure Power Points → Get Expert Advice →Yes. They are suitable for most indoor areas when installed in appropriate locations.
Hager Allure Power Points are available from Sparky Direct, offering convenient Australia-wide delivery from a trusted electrical supplier.
Consider the room, finish, and confirm suitability with your electrician before purchasing.
Returns depend on the seller’s return policy and whether the product is unused and in original packaging.
They usually include a manufacturer’s warranty, subject to correct installation and normal use.
They are typically sold individually, allowing you to order the exact quantity required.
Matching products within the Hager Allure range are generally available through electrical suppliers.
Yes. They can be used consistently across a home or building, subject to electrical design and compliance.
Yes. They are designed for regular everyday use in residential and light commercial environments.
Yes. Hager is a well-established brand in Australia, and electricians are generally familiar with its ranges.
Yes. Their smooth surfaces can be wiped clean as part of normal household maintenance.
Yes. They are frequently selected during renovations and new builds for a premium finish.
Safety depends on correct installation and appropriate use. A licensed electrician can advise if needed.
Hager Allure Power Points are premium electrical outlets designed to deliver reliable performance with a contemporary appearance for Australian residential and commercial interiors.
Yes. They are often chosen for architecturally designed homes and high-end renovations.
They offer a refined, contemporary design that complements modern interiors.
They are designed to meet Australian electrical safety requirements, with overall safety dependent on correct installation and use.
Yes. The range includes configurations suitable for double power point installations.
They are designed to suit standard Australian wall box dimensions, subject to site conditions and installer assessment.
Yes. They are suitable for offices, hospitality venues, and other light commercial spaces.
Yes. They are commonly used in homes where a modern, high-quality finish is desired.
Most Hager Allure Power Points are rated at 10 amps, suitable for general household and light commercial use.
They are designed for standard Australian mains supply of 230–240 volts AC.
Yes. Installation or replacement must be carried out by a licensed electrician in accordance with AS/NZS 3000 Wiring Rules.
Yes. Hager Allure Power Points are designed to comply with relevant Australian electrical requirements, including AS/NZS 3112, when installed correctly.
